Home > Products
Product Details
Titanium-based Lithium Adsorbent G-100
Introduction:
Titanium-based Lithium Adsorbent G-100 is an ion sieve made of titanium dioxide based material with stable crystal structure and three-dimensional ion exchange channels. It has very strong selectivity to lithium ions in terms of ionic radius and valence state, however rarely adsorbs other cations such as magnesium, sodium, potassium, boron and calcium in the brine. It has the characteristics of easy desorption, small dissolution loss, high concentration of elution. It can be repeatedly regenerated, repeated use, long service life. It can be used to fill the adsorption tower for lithium extraction, and the process is simple. Its unique particle size distribution and morphology makes the water flow resistance through the tower is small, the liquid flow smoothly even for the high viscosity concentrated brine.
Technical specifications:
|
Item |
Typical Value |
|
|
TiO2 % |
38.0~42.0 |
|
|
Li % |
5.5~7.0 |
|
|
Density g/cm3 ≥ |
1.10 |
|
|
Particle Size （mm） |
bigger than 1.2mm，% ≤ |
0.5 |
|
smaller than 0.3mm，% ≤ |
8.0 |
|
|
Volatiles at 105℃, % ≤ |
1.0 |
|
Product Application:
Titanium-based Lithium Adsorbent G-100 is widely used as lithium adsorbent in lithium extraction and recovery such as:
● Carbonate-based alkaline brine
● Sulfate brine
● Chloride brine
● High magnesium-lithium ratio brine
● Lithium-bearing geothermal brine
● Oil and gas field wastewater containing lithium resources
● Lithium sink mother liquor in lithium salt production process
● Lithium recovery from used lithium batteries
Application Performance:
|
Dynamic adsorption capacity |
≥12mg/g |
|
Applicable brine pH |
4.5-13 |
|
Minimum adsorbable Li+ concentration |
≤20mg/L |
|
Minimum emission Li+ concentration |
≤5mg/L |
|
Li+ concentration of desorbent |
≥10g/L |
|
Single cycle dissolution loss rate |
≤0.005% |
|
Mg2+ rejection rate |
99.83% |
Product Features:
1. High adsorption capacity (saturation adsorption capacity up to 13mg/g or more, operational adsorption capacity up to 5-8mg/g)
2. Low Li+ emission (the minimum lithium emission concentration is less than 1ppm, the operational emission concentration can be less than 5ppm)
3. High selectivity
|
|
Projects |
Unit |
Li + |
Na+ |
Mg 2+ |
Ca 2+ |
B 3+ |
K + |
|
Raw material Brine |
Cation concentration |
mg/L |
1954 |
2405 |
115740 |
38 |
2069 |
945 |
|
Ions/Li+ |
|
1.00 |
1.23 |
59.22 |
0.02 |
1.06 |
0.48 |
|
|
Proportion |
% |
1.59% |
1.95% |
93.98% |
0.03% |
1.68% |
0.77% |
|
|
Elution |
Cation concentration |
mg/L |
16757 |
1068 |
1666 |
67 |
104 |
91 |
|
Ions/Li+ |
|
1.00 |
0.06 |
0.10 |
0.00 |
0.01 |
0.01 |
|
|
Proportion |
% |
84.84% |
5.41% |
8.43% |
0.34% |
0.53% |
0.46% |
4. High desorbent concentration (maximum elution concentration up to 15g/L, operable concentration up to 8-10mg/L)
5. Applicable to a variety of brines
|
Brine type |
Component |
|||||||
|
B3+ |
Ca2+ |
K+ |
Li+ |
Mg2+ |
Na+ |
Mg/Li |
pH |
|
|
mg/L |
mg/L |
mg/L |
mg/L |
mg/L |
mg/L |
|||
|
Qinghai underground brine |
1006 |
290 |
4628 |
138 |
17239 |
82965 |
124 |
7.13 |
|
Sulfate type primitive brine in Tibet |
472 |
335 |
2749 |
388 |
2948 |
22706 |
7.6 |
8.1 |
|
Primitive brine of carbonate type in Tibet |
685 |
3 |
9202 |
343 |
87 |
46659 |
Na：Li=136 |
9.7 |
|
Brine type |
Li+ emission concentration |
Adsorption capacity |
Li+ in elution |
Mg/Li in elution |
||||
|
mg/L |
mg/g |
g/L |
||||||
|
Qinghai underground brine |
≤5 |
8.7 |
8.2 |
0.15 |
||||
|
Sulfate type primitive brine in Tibet |
≤5 |
10.6 |
9 |
0.044 |
||||
|
Primitive brine of carbonate type in Tibet |
≤5 |
9.8 |
8.5 |
Na：Li=0.008 |
||||
6.High cycle stability (after more than 500 rapid adsorption and desorption cycles, the decay rate of adsorption capacity is very small.)
Application Process Diagram:
Other information:
Packing: 25kg/bag, 500kg/bag, 1000kg/bag
Storage: Store closed container in cool, dry, well-ventilated area. Keep away from ignition source, heat and rain.
Handing: Avoid dust formation during handling. Provide appropriate exhaust ventilation at machinery and at places where dust can be generated. In case of insufficient ventilation, wear suitable respiratory equipment. Please see the Material Safety Data Sheets (MSDS) of this product for more safety information prior to use
1ST FLOOR,C19 BUILDING,NO.99 JINGSHIWU ROAD,212009 ZHENJIANG,JIANGSU,CHINA
+86-511-88699062 +86-511-88800677
sales@chinatio2.com
